Raspberry Pi ONVIF CCTV Camera and NVR - Chris - Medium

medium.com
3 min read
fairly easy
From a fresh Raspberry Pi OS install on a Raspberry Pi(2, 3 and 4), this tutorial will help you create an ONVIF Profile S+G compatible device. The setup is simple and the only required steps are to…
Creating your own home security system

From a fresh Raspberry Pi OS install on a Raspberry Pi(2, 3 and 4), this tutorial will help you create an ONVIF Profile S+G compatible device. The setup is simple and the only required steps are to download and install the deb package which will automatically begin the server. If you want the server to automatically setup your camera, you will need to have enabled it with raspi-config first.

sudo apt-get upgrade

wget

sudo apt install ./monocleserver-arm-1-19-2.deb sudo apt-get updatesudo apt-get upgradewget https://f002.backblazeb2.com/file/Monocle/monocleserver-arm-1-19-2.deb sudo apt install ./monocleserver-arm-1-19-2.deb

These commands will install a service and you should now be able to find your…
Chris
Read full article